REFERENCE: PINBALL AIRBORNE POWER SUPPLY PCB MISWIRE PART NUMBER: A0015205 AFFECTED GAME SN’S: [2239 THROUGH 2355] AND [1000410 THROUGH 1000502] DEAR DISTRIBUTOR, IF EITHER THE F9 OR THE F10 FUSE ON THE POWER SUPPLY PCB IS BAD, AND THE OTHER OF THE TWO FUSES IS STILL GOOD, BOTH FUSE LEDS WILL REMAIN LIT. THIS IS DUE TO THE DIODE TIE BACKS BEING CROSSED. THIS DOES NOT AFFECT THE GAME IN REGARDS TO FUNCTIONALITY, BUT CAN CAUSE CONFUSION WHEN TRYING TO TROUBLESHOOT. TO REMEDY PERFORM THE FOLLOWING ON THE POWER SUPPLY PCB: * TURN POWER OFF. * REMOVE THE VIOLET/RED WIRE AT PIN 3 OF CONNECTOR J16. * REMOVE THE VIOLET/ORANGE WIRE AT PIN 5 OF CONNECTOR J16. * INSERT THE VIOLET/RED WIRE INTO PIN 8 OF CONNECTOR J17. * INSERT THE VIOLET/ORANGE WIRE INTO PIN 9 OF CONNECTOR J17. IF YOU HAVE ANY QUESTIONS PLEASE CONTACT THE FIELD SERVICE DEPARTMENT. THANK YOU.